Granite paint

Polyvinyl alcohol glue test

Liquid Coil Coating Production Equipment

Liquid Coil Coating Production Equipment

liquid coil:
1. high elasticity: It can vibrate slightly with cover, expand and contract with the heat.
2. seamless coonection: coating is the whole piece covering the building, there is no connection point, so It is difficult to appear water, peeling, blistering etc.
3. high viscosity: active ingredients fully penetrate into the pore of the cement base surface, react with it, and form a compact protective layer with the base surface.

High-speed disperser is used for pre-mixing, dispersing and color mixing of all liquids. It has high production efficiency, hydraulic lifting and flexible frame rotation. When stirring and dispersing, the air absorption is very little, which can make the object dissolve quickly and the particles become smaller. It is suitable for mass production. It is widely used in water-borne coatings such as coatings, fuels, inks, resins, adhesives and daily chemicals.

How to produce ceramic tile gum back, with what equipment?

How to produce ceramic tile gum back, with what equipment? 

“zhongqing”brand ceramic tile gum back

1. "zhongqing”brand ceramic tile gum back brief introduction

Ceramic tile gum back, also known as vitrified tile gum back, is made up of two component of imported high quality polymer emulsion material and inorganic silicate. It is specially used for the surface treatment of vitreous tiles, archaize tiles, microcrystalline stones and marble with low water absorption and hard bricks, so as to enhance the bond strength between tiles, and effectively solve the problem of hollowing and shedding in the tile sticking process. 

2.  "Zhongqing” brand ceramic tile gum back character

A. The bonding strength is high, which can form a new bonding surface on the back of the vitrified tile and enhance the bonding ability.

B. Good flexibility, small hardening shrinkage, strong compatibility with cement-based bonding materials, strong bonding, excellent acid and alkali resistance and corrosion resistance.

C. Construction is convenient and easy to control; non-toxic and harmless, green and environmental protection.

3. "Zhongqing” brand ceramic tile gum back application. 

Construction engineering , home decoration are widely used. 

4. "Zhongqing” brand ceramic tile gum back investment guidance.

A.  Raw materials for ceramic tile gum back:  emulsion and additives

B.  Ceramic tile gum back plant investment guidance

Site: More than 50 square meters

Electricity: 380V industrial three-phase electricity (220V lighting can also be modified)

Workers: 2-3 people    

Equipment: 16,000 RMB

Liquidity: 50-100,000 RMB

C. ceramic tile gum back production equipment 

Tile Gum Back Material: Tile Gum Back Dispersor

Xinyang Shenghua SH-1000 ceramic tile gum back high-speed disperser,  hydraulic lifting, adjustable speed and high mixing uniformity, with a daily output of 5-8 tons.

D.  Tile Gum Back Technical Formula and Production Guidance

Xinyang Shenghua Chemical Technology Co., Ltd. provide a series of product guidance, such as dry powder, mortar, emulsion paint, waterproof paint, texture paint, art paint, etc. From product formulation training, raw material ordering, production process, construction technology, etc., Buy machine, you can free training ceramic tile gum back related technical formula.

E.   Tile Gum Back Packaging and Trademark Authorization Services:

1-5KG Plastic barrel

F. Ceramic tile adhesive related matching

Ceramic tile adhesive material can be purchased nearby, production and sales services and other details, can consult Shenghua Chemical for guidance and answers by professionals.

disperser delivery

high-speed dispersing mixer machine delivery, it can produce various paint products, such as emulsion paint, waterproof paint, covering paint and so on.  phone/wechat/whatsapp: +86 15757316908

wall putty machine

Dry-mixed Gypsum Plaster

Dry-mixed Gypsum Plaster

Compared with traditional materials, plastering gypsum has unique advantages:

1. Strong adhesion.

Plaster gypsum and all kinds of wall base materials (clay brick, cement block, aerated concrete, fly ash brick, gypsum block, cast-in-situ concrete, roof, etc.) can be well bonded, plastering without any interface agent, plastering directly, once finish done, plastering wall surface will not appear hollowing, cracking phenomenon.

2. Surface decoration:

Painting gypsum wall surface is fine and smooth without ash, high strength, no shrinkage, elegant appearance, no odor, no alkali, no cracks.

3. Fire resistance:

When the thickness of gypsum plaster is 20mm, the fire resistance can reach more than 2 hours.

4. Thermal insulation:

The thermal conductivity of gypsum products is small, about 25% of the thermal conductivity of cement concrete products and 30% of clay bricks.

5. Save time and cost.

The plastering gypsum layer has the advantages of fast setting and hardening, short curing period, complete hardening and strength up to standard in 5-7 days, which can greatly improve work efficiency and speed up the progress of follow-up projects. Compared with cement mortar, the plastering gypsum layer can advance the construction period by 1-2 months.

6. Construction convenience:

The gypsum plastering has the characteristics of easy plastering, easy scraping, easy repairing, low labor intensity, less material consumption, and winter construction is not affected by the temperature drop to nearly 0℃.

Xinyang Shenghua Provide powder mixing equipment, the machine is U shaped horizontal, the mixing speed is fast, the uniformity of material movement is high, the mixing time is short and the output is high. One machine can be used for many purposes, it can be used to produce thermal insulation mortar. Dry powder, such as gypsum, diatomite mud, etc., low maintenance rate, convenient maintenance, bearing at both ends of the mixer, material is not easy to enter; small area, automatic feeding conveyor, improve work efficiency; U-shaped cylinder structure, stable operation, low noise, long service life, wide application range; fully automatic micro-computer control.

Moreover, production formula are available. Contact us Phone/Wechat/Whatsapp: +86 15757316908                 www.shenghuachem.com

Shenghua Business introduction

Shenghua Business introduction

After nearly 20 years of development, Xinyang Shenghua Chemical Technology Co., Ltd. specializes in coatings, waterproofing, mortar factory building services in technical training, production equipment, brand, packaging, etc.

1. Machinery Manufactory specializes in producing coating equipment.  

2. RIRIXIN paint brand operation and technology training center.

3. interior and exterior putty powder, mortar building glue powder production.

4. Foshan paint production base.

In order to better serve all friends and customer, we welcome exchanges, visits and cooperation. Now we have a brief business introduction for each department.

I.     Machinery manufacturing the following mixers for paint factories:

1. A8 Fully Automatic Putty Powder Mixer (1 ton, 2 tons, 3 tons, 5 tons and large units with daily output of over 200 tons)

2. A8 ceramic tile adhesive mixer (daily output 10-100 tons)

3. Q7 nature stone lacquer mixer (1 tons, 2 tons, 3 tons, 5 tons, 10 tons, 20 tons, 30 tons, 50 tons).

4. GD2-1500 type putty paste mixer (can produce all kinds of thick coatings, imitation porcelain toughened putty paste paint)

5. Z-1000 high-speed dispersing machine (latex paint, wall solid, ground adhesive, K11, JS waterproof).

6. River sand dryer (3 tons, 5 tons, 10 tons, 20 tons, 30 tons, 50 tons per hour; can burn firewood, coal and gas).

7. Stainless steel building glue special equipment (electric heating)

8. K11, JS waterproof coating mixer equipment.

9. ATC type insulation mortar production unit (production of plaster mortar, bonding mortar and other mortar).

10. Pulse dust collector (24 bags and above) and other supporting services!

II.    Coatings, adhesives and waterproofing training centers can train the following market-mature popular technical formulas

1. Technical training of RIRIXIN putty powder (821 engineering putty powder, water-resistant putty powder for inner wall, crack-resistant putty powder for outer wall and putty powder for ceramic tile renovation)

2. RIRIXIN latex paint (internal and external walls, high and low grade latex paint) technical training

3. RIRIXIN natural stone paint (high and low grade real stone paint, black primer, top coat, color) technical training.

4. Gypsum plaster (bottom plaster, surface plaster, lightweight plaster) technical training.

5. RIRIXIN training of new water in water technology and water bag sand technology

6. K11, JS color waterproof coating technical training

7. Zhongqing ceramic tile adhesive technology training

8. RIRIXIN diatom mud technology training (waterproof diatom mud, ordinary diatom mud) 

9. Other matching technical training materials on the market

III.    Zhoneqing glue powder for paint, putty and mortar

1. Zhongqing brand nano-modified 901 additive (high-grade dry putty powder for interior and exterior walls universal, adding 3 kg per ton);

2. 903 (bonded mortar, plaster mortar, ceramic tile renovating putty adhesive special type)

3. 808 (building glue, imitation porcelain coating, neutral engineering putty special type)

The products sell well all over the country, and we are looking for agents to join. The samples are sent free to the paint factories.

IIII.    The main products of Foshan coating production base are:

1. Gold and silver sand series 2. fair-faced concrete series 3. amphibole series 4, birch series 5, terrazzo series 6, velvet series 7, Venice gypsum series 8, thousand velvet series 9, rust copper rust series and other supporting series of art coatings products, all products are available in stock, starting from  one barrel.

Contact us: Phone/ Wechat / Whatsapp: + 86 15757316908

Paint factory investment guidance

Paint factory investment guidance

At present, there are many investment products in the paint industry. If you invest in a paint factory, you can choose several products with wide use. The production process is simple and the benefit is good. What are these products?

1. "RIRIXIN" putty powder products.

This is undoubtedly the simplest, entry-level products of the paint industry, but also the largest amount of paint products, whether it is the interior or exterior walls, are essential to use it, a large amount of sales, is the preferred. How much does it cost to invest in a putty factory? 50,000 RMB, you are correct, with 50,000 RMB, you can invest in a small-scale putty powder production plant, plant about 100 square meters, mixer equipment can choose Xinyang Shenghua A8-1000 automatic weighing putty powder mixer (daily output 10-15 tons), 380V industrial electricity, 1-2 workers operation.

dry powder mixer

2. "RIRIXIN" Emulsion paint products

In home decoration, emulsion paint products with its smooth and delicate surface, scrubbing resistance, long service life, green and environmental protection features quickly occupied the paint market, but also has been decorated elegant, gorgeous, colorful and so on by the majority of owners.  For investors, emulsion paint is also a relatively profitable product, the cost of the product is relatively high, the investment of 80-100,000 RMB, the plant area about 100 square meters, mixer equipment select Xinyang Shenghua Z-1000 high-speed disperser emulsion paint (hydraulic lift, frequency conversion speed), 380V industrial power, 2-3 workers operation. 

emulsion paint mixer

3. "Lida" dry mortar products.

Mortar products are mostly used in engineering. Because of the stricter and stricter requirements for the quality of the external walls of houses, thermal insulation of walls has become an important part of building energy saving. Mortar products are subdivided into external wall insulation mortar, bonded mortar, plastering mortar and so on. Demand has risen steadily and investment prospects are good. Specific investment amount can be 50-80,000 RMB, plant requirements of 100-200 square meters, mixer equipment select Xinyang Shenghua ATC-1000 dry mortar mixer equipment (production line, high output), 380V industrial power, 2-3 workers operation. 

dry mortar mixer

4. "RIRIXIN" real stone lacquer products

Real stone paint products originated in the 1990s, mostly used for exterior wall decoration, with strong adhesion, good stain resistance, aging resistance, acid and alkali resistance, high temperature resistance, freezing resistance, is very popular, due to the high production costs, gradually replaced by wall brick and exterior wall emulsion paint products. Now the state has banned brick pasting on high-rise exterior walls. The life of exterior wall emulsion paint is shorter. Real stone paint products are back to the market. The market price of raw materials tends to be stable. Real stone paint occupies the vast market of paint industry with its practicability. The investment prospect is huge. Specific investment in about 80-100,000 RMB, plant 100-200 square meter, mixer equipment can choose Xinyang Shenghua Q7-5000 stainless steel real stone paint mixer (electric conversion), 380 industrial power, 3-5 people operate. 

real stone paint mixer

Other products, such as tile glue, plaster gypsum, putty paste, K11 waterproof, leak plugging, fast adhesive powder and other ancillary products can also be slowly increased!

Xinyang Shenghua Chemical Technology Co.,Ltd.

Address: No. 13 nanhu road, Xinyang city, Henan Province, China

Phone/Wechat/Whatsapp: 0086 15757316908

Email: 99146896@qq.com

http://www.shenghuachem.com

Dry Powder Mixer/ Putty Powder Mixer

dry powder mixer/ putty powder mixer

Our company mainly produces and sells dry powder mixer, dry powder mortar mixer, putty powder mixer, putty paste mixer, real stone paint mixer, insulation mortar mixer, hydraulic high speed dispersion machine and a series of mixers used in chemical industry. 
http://www.shenghuachem.com/ProductIndex

Putty powder mixer full automatic putty mixer

Putty powder mixer full automatic putty mixer

putty mixer

Putty Powder Mixer, Putty Mixer, Thermal Insulation Mortar Mixer, Thermal Insulation Mortar Production Line, Dry Powder Mortar Production Line, Dry Powder Mortar Equipment, Dry Powder Mixer, Powder Mixer, Dry Mixer Mortar Mortar Mixer, Dry Powder Mortar Production Set. 

It is suitable for producing putty powder, external wall thermal insulation mortar, anti cracking mortar, external wall crack resistant putty, caulking agent, etc.

Dry powder mortar equipment, can produce exterior wall insulation mortar, putty powder, seam mortar, bonding mortar and so on. It is mainly composed of conveyor, mixer, storage bin, automatic weighing and packing machine and so on. 2-3 people operate. The raw material is loaded from the hopper. The additives, such as cement and fiber, are put into the hopper and stirred for 2 minutes. Then the quartz sand is added and stirred for 3 minutes. The product can be lifted to the storage bin for metering packaging. The equipment is easy to operate, high efficiency, the main capacity of 1.5 cubic meters, each one ton of feed, can produce dry-mixed mortar 3-5 tons per hour.

Installed power conveyor 3KW, mixer 7.5KW, discharge machine 3KW, automatic weighing packaging machine 4KW.

http://www.shenghuachem.com/ProductDetail/1709242.html#invite0

computer metering dry powder mixer

Two outlet computer metering dry powder mixer

automatic metering dry powder mixer

Introduction
This dry powder mixer is a horizontal U-shaped cylinder with movable door at the bottom of the cylinder which make it easy to clean up.  Inside mixer has inner and outer double spiral belts. During the convection process, the two material streams permeate each other and change position to mix. The two sides roll and mix, the cylinder wall has no lump, no dead angle, fast mixing speed and high uniformity. Conveyor device, feed port can be build in ground level, convenient feeding. The whole machine runs smoothly, has low noise, long service life and is easy to install. It is widely used to mix dry powder mortar, wall putty, coatings, waterproof materials, chemical industry, ceramics, refractories and other industries (this equipment is double outlet type)

Equipment advantage
Our company can customize mixers of different specifications and materials according to the needs of different users. The machine can customize stainless steel muti-outlet for customers. Other types and accessories can be customized according to the needs or drawings. The equipment can meet two different packaging methods, for a variety of operations, which is our company's flexible manufacturing characteristics.
Advantages of computer metering equipment:
1. the operation is simple, the equipment only needs 1~2 worker, and the production efficiency is high.
2. The equipment covers a small area, has a strong integration of installation, superior performance of various components, long maintenance period of the main components, so that you can use without worries!
3. Stable performance and long service life.

Working principle
The inner and outer spiral belts move the material to both sides, the outer spiral belts move the material from both sides to the inside, so that the material is mixed back and forth, and the other part of the material is pushed down the spiral belts and moves along the axis and radial direction, thus forming a convective circulation. As a result of the above-mentioned movement of agitation, materials in a relatively short period of time to obtain rapid and uniform mixing, is the production of various dry powder, putty powder, mortar, ceramic tile glue ideal equipment.

Xinyang Shenghua Chemical Technology Co.,Ltd.
Address: No. 13 nanhu road, Xinyang city, Henan Province, China
Phone/Wechat/Whatsapp: 0086 15757316908
Email: 99146896@qq.com
http://www.shenghuachem.com

Hydraulic High Speed Disperser

Hydraulic High Speed Disperser

high speed disperser for paints

Product introduction

The hydraulic high-speed disperser is composed of frame, bearing seat, dispersing shaft, dispersing wheel, cylinder, hydraulic station and control cabinet. The frame lifting adopts hydraulic transmission, the lifting is stable and reliable, the frame can rotate 360 degrees, and can be used in one machine and multi-cylinder. It is suitable for mixing, dissolving and dispersing liquid and solid materials in chemical industries such as coatings, fuels, pigments, inks, papermaking, adhesives, etc. It is suitable for mixing, dissolving and dispersing liquid-liquid and liquid-solid materials in coating, dye, pigment, ink, paper making, adhesive and other chemical industries.

Equipment advantage
Shenghua high speed dispersing machine has many functions, such as hydraulic lifting, 360 degree turning, stepless frequency conversion and speed regulation. It can be equipped with 2-4 cylinders at the same time. The hydraulic lifting stroke of 1200mm and 360 degree rotation can better meet the multi-purpose of one machine. It can be transferred from one cylinder to another in a very short time. The disperser greatly improves the work efficiency and reduces the labor intensity.

Working principle
Features: When stirring and dispersing, the air absorption is very little, the mixing and blending effect is very good. With medium or high speed stirring, the dispersing can make the matter dissolve rapidly, and the particles become smaller.
The frequency conversion explosion-proof disperser is used for high-speed dispersion of ultra-fine solid particles into the liquid to form suspended particles. The characteristic of suspended particles is that the fine particles are not precipitated by the suction of the earth's center. In the process of dispersal, several processes are carried out at the same time.
The surface of solid particles is wetted with a liquid base.
Mechanical energy can be used to scatter particles into smaller particles.
The interaction between particles and liquid base determines the power of wetting and flocculation.
The interaction between solid particles and liquid base determines the effect of wetting and anti flocculation.
Remarks: special specifications and technical requirements can be customized.

Parameter
Type of disperser: hydraulic high speed dispersing machine
Material type: liquid-liquid / solid liquid
Applicable materials: food, glue, paint, ink, medicine, pesticide, adhesive.
Applications: chemical, food, medicine and daily chemicals
Speed range: 0-1500 (r/min)
Model: uniaxial / biaxial / explosion-proof
Speed category: Stepless speed change / frequency control
Dispersing wheel diameter: 160--370 (mm)
Lifting stroke: 1100~1400 (mm)
Motor power: 7.5--55 (Kw)

Xinyang Shenghua Chemical Technology Co.,Ltd.
Address: No. 13 nanhu road, Xinyang city, Henan Province, China
Phone/Wechat/Whatsapp: 0086 15757316908
Email: 99146896@qq.com
http://www.shenghuachem.com

Dry Mortar Mixer Machine Joint Production Equipment

Dry Mortar Mixer Machine Joint Production Equipment

dry mortar mixer machine

Dry-powder mortar production line is an upgraded version which includes a dry-powder mixer, a storage bin, a packaging machine and a secondary spiral conveyor. The combination of the production line can realize continuous production, increase production, and is cheap, occupies a small area, suitable for small and medium sized mortar and putty producers.

Working principle
When the dry powder mixer works and mixing, the material in the mixer is driven by two spiral belts rotating in opposite directions. The spiral belts rotate counterclockwise along the inner wall of the mixer. On the one hand, the material is turned left and right,  the weightlessness area is formed at the intersection and overlap of the two spiral belts. No matter how the shape, size, and density of the material, can make the material in the instantaneous weightlessness state, which makes the material in the machine tank to form a full range of continuous cyclic turnover, interleaving and mixing each other, so as to achieve rapid mixing uniform effect. After one stirring, the stirred material is put into the storage tank by the secondary elevator, and then the second feeding and stirring are carried out. During the period, the packaging machine connected by the storage tank is used to measure the discharging material, which saves the time needed for discharging after the stirring is completed, thus increasing the output.
(Dust collector optional)

Pamameter
Type:  1000kg/2000kg/3000kg/5000kg/500kg/1500kg
Application: chemical, paint,food and other powder materials.
Material type: solid+solid
Applicable materials: dry powder
Power type: Electric
Layout: Horizontal
Mixing mode: double spiral belt reverse mixing.
Operation mode: continuous operation mode.
Mixing drum shape: type U
The range of treatment is 1000/2000/3000/5000 (L).
Installation mode: fixed type
Motor power: 7.5/15/18.5/22 (kw)
Mixing time: 5-8 minutes.
Stirring speed: 35 (r/min)
Bucket capacity: 1.6/2.8/4/6.5 (cubic)

Xinyang Shenghua Chemical Technology Co.,Ltd.
Address: No. 13 nanhu road, Xinyang city, Henan Province, China
Phone/Wechat/Whatsapp: 0086 15757316908
Email: 99146896@qq.com
http://www.shenghuachem.com